12-19-2017 06:11 PM - last edited on 03-06-2024 09:05 PM by ROGBot
12-22-2017 07:00 PM
FIDDY56 wrote:
I have come across many youtube vids and articles showing how to setup two m.2 ssds in raid 0 for the z270 mobo but nothing for the rampage 6 extreme or apex. I don't care to try and deal with the huge debate about VROC. I just want to setup In the bios using PCH/SATA a raid 0 for the two Samsung 1tb m.2 ssds that are mounted on the riser card and in the dim.2 slot next to the ram dims. all I am trying to do is have windows recongnize the 2 m.2 cards as one bootable drive. and put windows 10 64bit on it. I have the irst drivers from intel and have tried the tuning wizard and manual but all the go bys from asus only show older bios from z270 boards.
this guide shows options in the bios for the z270 bios that are not in the bios 1004 for the r6e. https://rog.asus.com/articles/guides/how-to-install-two-m2-ssds-in-raid-0-on-maximus-ix-motherboards...
Could anyone please tell me step by step what to go into in advance mode in the bios how to setup raid 0 using pch/sata I keep getting told it can be done and it supposedly is easy to setup but I am a newbie and just cant figure it out.
I have more than enough pcie lanes to do this with chipset and i7 7820x. links to setup for x299 asus rampage 6 extreme bios steps for setting 2 Samsung 1tb m.2 ssds in raid 0 using sata, pch, would be great if has step by step , or if someone could post a guide would be extremely helpful. thank you for any help.
12-22-2017 08:54 PM
12-27-2017 05:33 AM
03-16-2018 05:45 PM
fexnok wrote:
Agreed, only way is connect one on M.2_1 and the other one on M2 port under cover, that's my current setup.
03-16-2018 06:47 PM
03-17-2018 08:38 AM
mike211 wrote:
First, take off the cover for the M.2 compartment by removing the screw.This compartment hold M.2 Socket ,insert the M.2 into place. Secure the second M.2 place onto DIMM.2 Module left side. Go to Advanced->PCH Storage Configuration->SATA Mode Selection, and select Intel RST Premium(RAID).Go to Advanced->Onboard Devices configuration. Select M,2_1(DIMM.2) source selection set to PCH. Go to Save and Exit save and reboot.Go back to see if your new RAID volume is showing up in Advanced-> Intel(R) rapid storage technology and then Create RAID Volume. Create a Windows 10 USB Bootable Flash Drive Media Creation Tool. Download and copy Driver Intel(R) RST AHCI/RAID Driver V15.7.1.1015 for Windows 10 64-bit onto another USB drive.
03-17-2018 11:37 AM
03-17-2018 11:56 AM
mike211 wrote:
Go to Advanced->PCH Storage Configuration->Now Enable PCIe Storage RAID support for both M.2_1 and PCIEX4_1/PCH M.2_1(DIMM.2) PCIE Storage Raid Support