cancel
Showing results for 
Search instead for 
Did you mean: 

TR 1950x / Zenith extreme 0804 Extreme OC ( STABLE ). up to 4.2 Ghz @ 3600MHZ

GeekhomeGamer
Level 7
Hi all :).


The following screenshot prove that TRripper 1950x can run stable @ 4.2 GHZ with 3600Mhz ram speed.
This config/settings successfull pass AIDA64 Stress test and Prime95 test.

Can someone tell me if this is normal or ( most probably) a bios bug ?.

considering people can't run even on stock ram speed and can't reach 4.x GHz this seems very strange...

I'm really happy with build but... i think this result is a bios bug.

6995169952

Settings:

OC : manual
3600
x40
100
LLC1/2 : 4
RAM ( OC @ 3600 ) v 1.71xx >73xx ( 3200 1.2500 )
cpu v set to 1.22500 ( bios show core voltage to 1.242 @ 23"c ) cpu-z show 1.264 !!!!

AMD PBS > IOMMU ENABLED
amd PBS > Streaming store control > enabled
amd PBS ZEN COMMON > custom pstate throttling > DIsabled

Zenith Extreme ( actually 0804 - aura 1.0.13 )
AMD RyZEN Threadripper 1950x
I can choose from this two settings
( 4.206 v1.26.875 ) x42 ( don't use it not caus system stability but fear of a bios bug and damage
( 4.0 v1.22500 ) x40
G.Skill RGB TridentZ 4x8 3200 CL14 @ v 1.2500 ( ZTR ) ( 3600 CL14/T2 v1.73 > 74 / 75 stable )

I never see Cpu temps exceed 26/30C degrees even with SW Stress test.
Enermax stock Thermal paste ( i'm waiting for Conductonaut liquid metal 5 grams )

this settings full pass AIDA64 / prime95 / Cpu-z / Cinebench / 3DMark.

i don't run "nonsense" 24/48/96 Hours of le mans stress tests. my stability test runs for 4 hours max
running stress test Software + VLC MKV video at the sametime, if the test pass.. is more than enough for my taste.

Full Specs:

Cougar Conquer
Corsair AX1500i
Zenith Extreme ( actually 0804 - aura 1.0.13 )
AMD RyZEN Threadripper 1950x
G.Skill RGB TridentZ ( Version ZTR ) 4x8 3200 cl14
GIGABYTE GTX 1060 6GB ( rev 2.0 ) ( 2x Titan XP/ 1x Volta after Holidays )
Corsair HP500 512
Samsung 960 Pro 1TB
Samsung 850 pro 1TB
ForceGT 240
8 TB 7200/256MB
Corsair Lightning Pro Controller
4 RGB LED Stripes
Integrated 7" Case monitor Display for Temp Monitoring.
Additional rear fan suspended pointing to VRM and CPU AIO Liquid Cooling Pump.
Enermax TR4 360 AIO Liquid Cooling
11,788 Views
6 REPLIES 6

GeekhomeGamer
Level 7
mmmmm..

full of real expert here ah... 😄 hahahahaha

Im happy for you as of all the bios updates and stuff. I get insane temps at 4GHz asus oc profile and have a similar system.
My main problem is that the volts ramp up to really high levels => high temps.
And Aura and OLEDpanel dont work anymore :-(, otherwise its all good and dandy.
BNEA02

bnea02 wrote:
Im happy for you as of all the bios updates and stuff. I get insane temps at 4GHz asus oc profile and have a similar system.
My main problem is that the volts ramp up to really high levels => high temps.
And Aura and OLEDpanel dont work anymore :-(, otherwise its all good and dandy.
BNEA02



I think my system not showing the REAL speed and temps... this is why i ask on the forum if my specs is normal or a bug..

anyway.. for your problem..

have you tried to set Loadline to 4 / 4 ? with vcore @ 1.26xxx w cpu ratio x38 ?.
on some builds the RAM Module can be the cause of cpu vcore instability/temps.

what temps you read ?.
you have liquid cooling on cpu ?.

Ill have to get back to you as im at work atm, but will post full specs...

bnea02 wrote:
Ill have to get back to you as im at work atm, but will post full specs...



Yes, i'm curious and eventually happy if with some help i can try to fix it :).

DragonessLover
Level 7
GeekhomeGamer wrote:
Hi all :).


The following screenshot prove that TRripper 1950x can run stable @ 4.2 GHZ with 3600Mhz ram speed.
This config/settings successfull pass AIDA64 Stress test and Prime95 test.

Can someone tell me if this is normal or ( most probably) a bios bug ?.

considering people can't run even on stock ram speed and can't reach 4.x GHz this seems very strange...

I'm really happy with build but... i think this result is a bios bug.

6995169952

Settings:

OC : manual
3600
x40
100
LLC1/2 : 4
RAM ( OC @ 3600 ) v 1.71xx >73xx ( 3200 1.2500 )
cpu v set to 1.22500 ( bios show core voltage to 1.242 @ 23"c ) cpu-z show 1.264 !!!!

AMD PBS > IOMMU ENABLED
amd PBS > Streaming store control > enabled
amd PBS ZEN COMMON > custom pstate throttling > DIsabled

Zenith Extreme ( actually 0804 - aura 1.0.13 )
AMD RyZEN Threadripper 1950x
I can choose from this two settings
( 4.206 v1.26.875 ) x42 ( don't use it not caus system stability but fear of a bios bug and damage
( 4.0 v1.22500 ) x40
G.Skill RGB TridentZ 4x8 3200 CL14 @ v 1.2500 ( ZTR ) ( 3600 CL14/T2 v1.73 > 74 / 75 stable )

I never see Cpu temps exceed 26/30C degrees even with SW Stress test.
Enermax stock Thermal paste ( i'm waiting for Conductonaut liquid metal 5 grams )

this settings full pass AIDA64 / prime95 / Cpu-z / Cinebench / 3DMark.

i don't run "nonsense" 24/48/96 Hours of le mans stress tests. my stability test runs for 4 hours max
running stress test Software + VLC MKV video at the sametime, if the test pass.. is more than enough for my taste.

Full Specs:

Cougar Conquer
Corsair AX1500i
Zenith Extreme ( actually 0804 - aura 1.0.13 )
AMD RyZEN Threadripper 1950x
G.Skill RGB TridentZ ( Version ZTR ) 4x8 3200 cl14
GIGABYTE GTX 1060 6GB ( rev 2.0 ) ( 2x Titan XP/ 1x Volta after Holidays )
Corsair HP500 512
Samsung 960 Pro 1TB
Samsung 850 pro 1TB
ForceGT 240
8 TB 7200/256MB
Corsair Lightning Pro Controller
4 RGB LED Stripes
Integrated 7" Case monitor Display for Temp Monitoring.
Additional rear fan suspended pointing to VRM and CPU AIO Liquid Cooling Pump.
Enermax TR4 360 AIO Liquid Cooling




Your pictures way to blurry for me to see at all. I like to know how you got to 4.2ghz stable. Details on what was changed in bios. Did you ever figure out if it was a bug? That oc for 4ghz and low voltage seems not stable. 1.225? You sure it was not 1.25?

Can I get detailed guide for oc ram? All the settings related to ram and stuff.