Hello!
Hello together!
I have a brand new Asus Maximus X Code MOtherboard with a brand new Intel i7-8700k CPU and a brand new Corsair Ram KIT CMK16GX4M2B3000C15 (2x8GB DIMMs 3000MHZ CL15)
My Problem is, that i get only a blank Screen when i insert both DIMMS. The Q-LED Error always says "CC" oder "55".
There are many possible solutions in the Asus Forums, but nothing helps...
The DIMMS works seperatily, so i get a picture. But when i use both together i only get this Errors!
(and sometime both DIMMS works for 2-3 minutes after the PC Freezes)
I already have updated the Bios to latest Version 0802, but no improvement
I already have choose from "Auto" to "XMP" and selected the "Profile1", so that the Corsair RAMs run with 3000MHZ and 1,35V.
Without this the RAMs only runs on 2133MHZ and 1,18V, but also with 2133MHZ i get the same Errors!
I also have set the DDR4 Frequency and the Voltage manually to 3000MHZ and 1.35V but also this brings no improvement. Same Errors...
I'm totally at a loss and already despair
Can Somebody here helps me?
I hope somebody here can help me... I have payed over 1200€ and my new System wants work!
The Corsair Kit i have bought, is also on the Qualified Memory List from Asus!
I have the Version XMP 5.30 (when this helps..)
Best Regards!
Edit:
What i forgot to say... ( i need sleep sorry):
I already have tested the Maximus Tweak Mode 1 & 2 with no solution.
And as i already mentioned, each DIMM as a Single will work! So i have tested each DIMM as a Single with Memtest 86 with NO Errors!
And YES the DIMMs are correctly installed in A2 & B2 Slot.... (i am a learned Technician and have already built thousands of computers :))
And many many other possible solutions, that i have found here from others Users in this Forum!
AND Please forgive me, i am a German User with terrible English Skills :rolleyes
EDIT2:
And because i have this Problem from the beginning, since i have bought it from my Seller last Week in the "old" year i spent the last Days included the Night over to New year in the basement and test and test and search a solution.
And because New Users here must be manually activated i could not post here, before today, until my Account was activated!
So i also have opened a Thread in the Corsair User Forum:
Here the Link (if this is undesirable, please remove the link) 😮