cancel
Showing results for 
Search instead for 
Did you mean: 

New bios 1003 for Asus X hero input / questions

bass_junkie_xl
Level 11
BIOS
Version 1003
2018/01/028.23 MBytes
ROG MAXIMUS X HERO (WI-FI AC) BIOS 1003
Improve system performance.
Improved DRAM compatibility

has any one used this yet ? currently im on bios 802 with
8700k @ 5 ghz 1.33v adaptive -delided
g.skill rgb 16gb 3000 mhz @ manual over clock @ 4000 cl 18-19-19-38 auto vccio / vcssa
and its stable 24hr in tests

should i even flash it ?

does this bios fix the audio crackling / un balanced sound in the drivers ?

any input would be nice
Rig # 1 - 14900K SP-115 | 87 MC @ 6.0 GHZ | 5.1 R | 4.5 E | DDR5 48GB @ 8,400 c36 | Strix RTX 4090 | XG27AQN 1440P 27" 360 Hz G-Sync ULMB 2

Rig # 2 - 13900KS-SP-120 | 80 MC @ 5.8 GHZ | 5.0 R | 4.5 E | DDR4 32GB @ 4,300 c15 | Strix RTX 3080 | Aoc 1080P 25" 240 Hz G-Sync
20,531 Views
40 REPLIES 40

erica647
Level 8
Where did you get this BIOS version? I don't see it up on the site yet.

Just look on the driver site on Asus.com. There is a new Bios 1003 for Asus Maximus X Formula too !

Still not coming up for me... wonder if it's locale-related or if it's been pulled for some reason.

So this isn't for the WiFi AC model?

i flashed to version 1003 just fine evything works

1 new issue with bios 1003

i have 2 fans pluged in to to cpu opt near cpu and when i turn those fans up the fan header at the bootom right side of board also turns up to

issues fixed

1 issue is fixed is cpu z not reporting proper vcore cpu volts it does now work properly

on going issue
no vrm temps in hardware monitor or bios


crackling bad audio with un blanced sound 😞 ugh i was hoping ti was fixed

my 4000 mhz ram over clock from 3000 is still stable and my 5 ghz 1.33v adaptive is still stable

this is for asus rog x hero ( wifi )
link : https://www.asus.com/ca-en/Motherboards/ROG-MAXIMUS-X-HERO-WI-FI-AC/HelpDesk_Download/
Rig # 1 - 14900K SP-115 | 87 MC @ 6.0 GHZ | 5.1 R | 4.5 E | DDR5 48GB @ 8,400 c36 | Strix RTX 4090 | XG27AQN 1440P 27" 360 Hz G-Sync ULMB 2

Rig # 2 - 13900KS-SP-120 | 80 MC @ 5.8 GHZ | 5.0 R | 4.5 E | DDR4 32GB @ 4,300 c15 | Strix RTX 3080 | Aoc 1080P 25" 240 Hz G-Sync

bass junkie xl wrote:
i flashed to version 1003 just fine evything works

1 new issue with bios 1003

i have 2 fans pluged in to to cpu opt near cpu and when i turn those fans up the fan header at the bootom right side of board also turns up to

issues fixed

1 issue is fixed is cpu z not reporting proper vcore cpu volts it does now work properly

on going issue
no vrm temps in hardware monitor or bios


crackling bad audio with un blanced sound 😞 ugh i was hoping ti was fixed

my 4000 mhz ram over clock from 3000 is still stable and my 5 ghz 1.33v adaptive is still stable

this is for asus rog x hero ( wifi )
link : https://www.asus.com/ca-en/Motherboards/ROG-MAXIMUS-X-HERO-WI-FI-AC/HelpDesk_Download/


Thank you for the link! 🙂

bass junkie xl wrote:

1 issue is fixed is cpu z not reporting proper vcore cpu volts it does now work properly



Can you define not reporting proper vcore cpu volts? Do you mean it no longer shows overshoot or something else?

Tuff253 wrote:
Can you define not reporting proper vcore cpu volts? Do you mean it no longer shows overshoot or something else?


before cpuz would show always this cpu voltege no matter what
0.620 v or 0.0310 v
after new 1003 bios cpuz reports 100 % correct voltege for me 1.34v 🙂 so its fixed with this bios and i dont need to always use hardware monitor all the time now
Rig # 1 - 14900K SP-115 | 87 MC @ 6.0 GHZ | 5.1 R | 4.5 E | DDR5 48GB @ 8,400 c36 | Strix RTX 4090 | XG27AQN 1440P 27" 360 Hz G-Sync ULMB 2

Rig # 2 - 13900KS-SP-120 | 80 MC @ 5.8 GHZ | 5.0 R | 4.5 E | DDR4 32GB @ 4,300 c15 | Strix RTX 3080 | Aoc 1080P 25" 240 Hz G-Sync