AI Suite 3 Version 3.00.10 & 3.00.13 - user test/report thread

[sanchit.technogeek]

ai suite 3 beta somehow causes windows power plan to revert from high performance to balanced, every time I boot up windows.

[dannyboy292]

I am using Dip 5 1.05.13 without any problems what so ever.

[sanchit.technogeek]

I am using Dip 5 1.05.13 without any problems what so ever.

oh! looks like i am a version behind (using Dip 1.05.11)

[Michael J]

Go back and install the beta version again.

Boot back up and exit AI Suite

Go to Programs and Features in Control Panel

Click on AI Suite 3 for removal

Check only the Dual Intelligent Processor for removal ( Check Mark )

Wait while it removes it ( can take some time just sitting there )

Follow Prompt to Re - Boot

After System is up Exit AI Suite 3 Again

Do the New AI Suite Setup ( I did it from flash drive )

Install and re-boot again...

Everything should run...

Good Luck

[sanchit.technogeek]

I am using Dip 5 1.05.13 without any problems what so ever.

installed the latest one , still it keeps reverting from high performance to balanced.

[sanchit.technogeek]

ai suite 3.00.10/13 somehow causes windows power plan to revert from high performance to balanced, every time I boot up windows.

[Raja@ASUS]

You can always set your fans up via UEFI. Yours truly uses an Aquaero with Aquasuite. Never looked back since.

[RamJunkie]

Official Statement from ASUS on the AI Suite Issues: https://www.asus.com/support/FAQ/1035296


Looks like we need to wait a few days to see if ASUS come up with a new version to resolve the issues....

Note: I found this via the R6E Drivers/Support - FAQ Pages.

**UPDATE! - New version has been released to resolve issues:

Version 3.00.13
2018/01/16

You can find it via the R6E Driver download page as above.

Just tried the new version . Tried to uninstall the old first like it says .it says to reboot the computer. Rebooted try to install new and it says it needs to reboot first .rebooted again and went to look and old one is still installed and wont uninstall . Not sure where to go from here.

[Raja@ASUS]

For those of you experiencing non-working modules in these Ai Suite updates, I have reported the issue to hq. They cannot replicate your issues so far. If/when they do, they will work on a patch.

Just a reminder to everyone: whether you are trying to get attention or not, please keep the expletives out of your posts. I had to edit some thread titles, and edit some of your posts. I don't want to do it again. If you're thinking of posting another expletive-laden rant (you know who you are), please note, that if it occurs again, I will delete the posts/threads, and also issue bans.

[BigBro]

See below about Power Plans always defaulting to 'Balanced' inside Windows 10, this is a repost.

Also... worth noting that the AiSuite III version 3 upwards may understate your CPU temperature,

Therefore SMART fan control may be running the CPU fan under the RPMs actually required...

55 degrees Celsius in AiSuite could actually be as high as 65 degrees Celsius...

Use a 3rd party application like CPU-Z or any system monitoring tool like Corsair Link to confirm the temperature discrepancy.

Your other option is to open 'Windows Task Scheduler' and navigate to the Task Scheduler Library' section and then the 'Asus' menu item

Locate 'Asus DipAwayMode' and highlight or select it and then click 'Disable'.

Put your PC into the desired power mode via Windows and then restart Windows to confirm, voila!

Now I'm set to 'High Performance', and now it stays there without flicking back to 'Balanced' every restart / reboot or boot up.


(For me, It can stay disabled in my Task Scheduler until Asus fix it properly without adding more glitches)

Hope this helps