AI Suite 3 Version 3.00.10 & 3.00.13 - user test/report thread

[Zeroed85]

I'm still getting Event errors:

Faulting application name: Setup.exe_unknown, version: 1.0.0.4, time stamp: 0x00000000
Faulting module name: KERNELBASE.dll, version: 10.0.16299.15, time stamp: 0x2cd1ce3d
Exception code: 0x0eedfade
Fault offset: 0x001008b2
Faulting process id: 0xaec
Faulting application start time: 0x01d387476eb53c97
Faulting application path: C:\Users\My PC\Downloads\AI_Suite_III_3.00.10\Setup.exe
Faulting module path: C:\Windows\System32\KERNELBASE.dll
Report Id: 6b724bd1-c23d-4336-b5cc-0153b618bd43
Faulting package full name:
Faulting package-relative application ID:

The installers adds these folders and files to C: but no installer actually runs.

[Forna]

I am experiencing this exact problem as well. Asus Maximus VII Formula w/4790K, latest W10 update w/security update and AI Suite III beta in OP.

I should note, this is a clean install of W10 and AI Suite III beta. The ONLY other program I installed was Firefox (Edge can go to hell). I get that error when I click on the fan tuning menu. Before I did the dual intelligent processor setup process, fan control worked fine. But after I did that process it broke as described above.

Run as admin did not work either. Anyone with an M7F and W10 have this working? Also, no error report in event viewer for this issue. WTH!

I had your same error... I uninstalled AI3 beta, AI3 cleaner, re installed... and now works, but:

- I can't select fan position
- AI3 doesn't remember settings
- I can't run 5-Way Opt otherwise PC comes in a reboot loop

[DaveImagery]

AI Suite II still pulls up on my Win 7 machine. This problem only affecting Win 10?

[AMP_US]

I had your same error... I uninstalled AI3 beta, AI3 cleaner, re installed... and now works, but:

- I can't select fan position
- AI3 doesn't remember settings
- I can't run 5-Way Opt otherwise PC comes in a reboot loop

Is there a link to the AI3 cleaner?

I had close to the same 3 issues out of the box. Couldn't select fan position, no option (doesn't matter to me), AI3 doesn't remember settings (before 5-way opt setup), buuuut, 5-way opt setup kills FanExpert. I did not get a boot loop but eh. So basically we are SOL. Right now I am running off BIOS, which is "functional" but far from ideal since there is now up/down delay/smoothing setting. No way in hell I'm touching SpeedFan. IDK what would make the M7F different from any other ROG board in terms of PWM control. Maybe it's a BIOS thing?

I've contacted Asus CS via phone and they said they would call me back Monday-ish. I've sent them messages on Twitter and Facebook. I've also contact MS that this update has messed with PWM control with Asus motherboards (will to bet WS boards are affected as well). I'm not very optimistic Asus will issues a patch (BIOS or AI Suite for a 3 gen old mobo. Since I have a custom loop, I'll probably end up buying an Aquaero and handling fan/pump control that way.

[wootwoots]

this AI suite3 version is supposed to work for any MB version ? or is it restricted to somes ?
( i have a hero VII )

[geneo]

this AI suite3 version is supposed to work for any MB version ? or is it restricted to somes ?
( i have a hero VII )

I am running it on Hero VI with no issues.

[wootwoots]

I am running it on Hero VI with no issues.

Alright then, good to know, is there will be some official annoncement for the release ?
or better keep check the forum ? because the intel security update thing killed AI suite 3 ( even tho, my fanprofile still seem to be correctly applied, that's all what matter to me )

And do you need to uninstall the preview AI suite 3 version to install this one ? or do it replace it ?

[nOm nom NOM3]

Rampage V Edition 10 with AISuite3_3.00.10 does not work.

UEFI version 1503 (not the newest version, if I move up I have random system instability so I am staying on 1503)

• Uninstalled old version of AISuite
• Rebooted
• Ran AICleaner
• Rebooted
• Installed AISuite3 V3.00.10

It does appear to run in the background, however I never get any GUI or taskmanager icon.
I will keep messing with it to see if I can get it to work

[Flegma]

Can someone confirm is this version is compatible with Z87 boards?

[kblackw]

Installed and it runs OK. Ran Fan Xpert 4 to calibrate fans, also runs OK. I5-7600K, Maximus IX Hero, Win10 0917 Build 16299.192