- last edited on by
ROGBot
Hello, i was wondering if you guys had problems with either AiSuite3 or Fan Xpert 4. I just purchased a ROG STRIX Z370-E motherboard with the 8600K processor. So when i install AiSuite3 my 2 PWM cpu fans 1 is cpu_fan the other is plugged on cpu_opt. Before running fan tuning it runs at 800 rpm. My fans range from 600-1800 rpm. Right after running the fan tuning, it wrongly detects my minimum to this chart :
I checked in BIOS and the fan setting : silent, standard, turbo, full speed, work fine.
In windows, those 4 same settings don't change anything, it stays at 1800rpm
I tried a few version of AiSuite3 and as soon as i run the fan tuning they go full blast.
In AiSuite3, both CPU fan mode : smart mode or fixed rpm mode are both grayed out.
Any suggestions ?
I checked in BIOS and the fan setting : silent, standard, turbo, full speed, work fine.
In windows, those 4 same settings don't change anything, it stays at 1800rpm
I tried a few version of AiSuite3 and as soon as i run the fan tuning they go full blast.
In AiSuite3, both CPU fan mode : smart mode or fixed rpm mode are both grayed out.
Any suggestions ?
