Results 21 to 23 of 23
-
01-20-2018 07:47 PM #21
- Join Date
- Mar 2017
- Reputation
- 10
- Posts
- 40
-
01-20-2018 07:56 PM #22
- Join Date
- Mar 2017
- Reputation
- 10
- Posts
- 40
then I will try on this occasion to go up to 1.36v to the ram, with DIGI + section in factory values. to 3200mhz and the official times of the ram, if this does not work then I will lower to 2666mhz having the same times and voltages in VCCSA and RAM.
in a few minutes I tell you how it was
-
01-20-2018 10:54 PM #23
- Join Date
- Mar 2017
- Reputation
- 10
- Posts
- 40
best regard.
I think that the system could be stabilized at 2666 mhz with factory times and at 1.35v, set dram power to 100% and optimized phases, the VCCSA stayed at 1.20v and until now it seems to be stable, if I calculate the real latency I would be about 6 NS which is between the average, likewise if it fails again in something I will not try again with this kit, I will have to buy a compatible one for this board.
Thank you very much everyone for your appreciated help.