cancel
Showing results for 
Search instead for 
Did you mean: 

ASUS 751JT Temperature Results After Repaste

Halil
Level 7
I repasted with Noctua NT-H1 and Thermal Pads From Arctic 1mm and 1.5mm.
GPU Temperature is Normal but how about CPU ? is This Normal or should i Repaste again ?
5 Minute 31 Second 100% CPU (4750HQ) and 100% GPU (970M), 70840
halilmentes.com
2,526 Views
2 REPLIES 2

Gps3dx
Level 12
Halil wrote:
I repasted with Noctua NT-H1 and Thermal Pads From Arctic 1mm and 1.5mm.
GPU Temperature is Normal but how about CPU ? is This Normal or should i Repaste again ?
5 Minute 31 Second 100% CPU (4750HQ) and 100% GPU (970M),


you'll be better off doing the "intake mod" - for me it did and still does wonders for lowering temps ~15-20.
can you explain how much paste you used and what did you re-paste ? which paste is it ? what about the mem chips of the gpu ?
did you removed previous oem pads ?
Asus G751JT
Samsung EVO 850 120GB + 1TB HDD 7200RPM
Cleaned installed Win 10 HOME
My Guides:

  • [POST=538713]ROG LAPTOPS: COMPLETE DRIVER LIST ![/POST]
  • [POST=538713]How to install windows 8/8.1/10 on any UEFI supported laptop the PROPER way[/POST]
  • [POST=538711]HOW TO (EASILY!) UPGRADE FROM WIN7 SP1/8.1 WITHOUT GOING THROUGH THE UPGRADE PROCESS ITSELF ![/POST]
  • [POST=605307]HOW TO REMAP FN+KEY AND SPECIAL BUTTONS: "STEAM", "ROG" & "SHADOWPLAY"[/POST]
  • [POST=539663]Win 10 x64: SETUP USB @SUPERSPEED, NO HANG-UPS! | ACCELERATES USB 3.0/2.0 TRANSFER RATE SPEED TWICE![/POST]

Gps3dx wrote:
you'll be better off doing the "intake mod" - for me it did and still does wonders for lowering temps ~15-20.
can you explain how much paste you used and what did you re-paste ? which paste is it ? what about the mem chips of the gpu ?
did you removed previous oem pads ?


Bro I Used Noctua NT-H1 for GPU and CPU about OEM Pads THERE IS NO PAD before they used on mem chips thermal paste too !! which IS hard to remove from mem chips. I USED Vrams
I bought ARCTIC Thermal Pad 1mm for Mem Chips and other parts i used 1.5mm ( ARCTIC again ) about intake mod man how can i cut the case ? if this is easy i can repaste again and cut the case
halilmentes.com