Results 1 to 2 of 2
  1. #1
    New ROGer Array MrRocco PC Specs
    MrRocco PC Specs
    MotherboardROG Strix X399-E Gaming
    ProcessorRyzen Threadripper 1900x
    Memory (part number)G.Skill 3000MHz 32GB
    Graphics Card #1AMD Fury X
    Graphics Card #2AMD Fury X
    Monitor3x NEC EA244WMi
    Storage #1Samsung 960 Pro NVMe
    Storage #2Samsung 840 Pro SSD
    CPU CoolerEK-FB Asus ROG XE Monoblock
    CasePhanteks Enthoo Luxe TG
    Power SupplyCorsair RM1000
    Keyboard G.Skill KM780
    Mouse MS Sidewinder
    OS Windows 10 Pro x64
    Network RouterpfSense

    Join Date
    Nov 2017
    Reputation
    10
    Posts
    3

    EK-FB Asus ROG ZE Monoblock for Threadripper socket TR4

    Hi folks,

    I wanted to start a thread and post some info on the new EK block for TR4 (Asus ROG edition).

    This this is beauty and the beast! It is huge because socket TR4 is huge. It is beautiful as clear acrylic over nickel plated copper base plate. It replaces the heatsink, heatpipe and fan that comes on the board covering the VRMs. I will admit that I have not really gotten into the overclocking of my TR1900X yet. Therefore I can't really comment on how hard I can push the chip. I also have no way, nor do I care for the trouble of trying to compare this to an AiO or air cooler.

    For future builders using this part, I will offer a few points of consideration that hopefully will save you some time or potential problems.

    • Careful with the bolts: The socket TR4 is already documented as sometimes being problematic. Not all of the threaded nuts on the socket are cut cleanly or completely. The result of my first mounting was that a bolt snapped off! Be very careful when starting to tighten down the four mounting bolts. Get each one started .5 of a turn. Then go in a diagonal pattern and give each one 1 rotation. It will take just an extra minute but better than what I went through. Do NOT over tighten! The bolt shank is supposed to rest against the threaded cap. However, on my first mobo that was impossible due to the manufacturing tolerance. You can get a M3.5 tap, or a spare bolt to use to work on the socket.
    • The light strip is ADDRESSABLE RGB: Is says this in the sheet, but very easy to overlook. It plugs into the ADD header on the mobo and NOT one of the 4 pin RGB headers. They look the same so easy mistake to make and you potentially burn out the leds in the WB.


    Attached is a picture of it mounted. I need to get some better shots rather than using my phone.

    I'd like to give a shout out to EK for the excellent support in helping me recover from the build mistake. Great products and great support!

    Click image for larger version. 

Name:	Photo Dec 01, 4 40 31 PM.jpg 
Views:	6 
Size:	187.8 KB 
ID:	69388

    P.S. In a pinch, you can remove the retaining circlip from one of the bolts while relieving the spring tension. This gives you a loose bolt to experiment with screwing into the threaded holes. That way you know if one of them will give you trouble.

  2. #2
    ROG Guru: Brown Belt Array Vlada011 PC Specs
    Vlada011 PC Specs
    MotherboardRampage V E10 (BIOS 1903)
    ProcessorIntel®i7-5820K (4.5GHz 1.325V)
    Memory (part number)CMD16GX4M4A2666C15
    Graphics Card #1ASUS GTX1080Ti Poseidon
    Sound CardSound Blaster ZxR
    MonitorSamsung P2450H
    Storage #1Samsung 970 EVO PLUS 1TB
    Storage #2Samsung 850 EVO 1TB/WD Black 2TB
    CPU CoolerEK RGB Monoblock RVE10
    CaseLian Li PC-O11 WXC
    Power SupplyEVGA 1200 P2
    Keyboard Deck 87 Francium PRO - MX Brown DS PBT
    Mouse Logitech G900
    Mouse Pad Steeseries QCK
    Headset/Speakers CREATIVE T5900 5.1
    OS Windows 10 Pro x64 v1903
    Accessory #1 iPhone SE Space Grey
    Accessory #2 EK XRES D5 Revo 100 Glass PWM + CoolstreamPE 360
    Accessory #3 Noctua NF-A12x25 PWM x3 (radiator)
    Vlada011's Avatar
    Join Date
    Oct 2013
    Reputation
    20
    Posts
    1,465

    Very nice build. Great watercooling and hardware.
    It's great how ASUS instaled 24pin and 8+8pin close to each others.
    Much better for cable management.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •