Rvie wont boot

[Georgia]

Hey all just booted my pc and got an error code memory B0 , yellow memory light is on and red cpu light is flashing at the same time.
Pc was working fine before reboot! have pulled all memory dimms from mobo and inserted 1 dimm in mobo and tried different dimm slots,
but get same error code.
Anyone have any ideas i googled qcodes for this mobo and cant find anything?.
Thanks for help in advance...Cheers.

[FireRx]

reset you cmos ansd start over again!

[Georgia]

reset you cmos ansd start over again!

Hi FireRx i have reset cmos and reflashed bios with 1004 and 1102 still getting same error.

[Georgia]

Hi FireRx i have reset cmos and reflashed bios with 1004 and 1102 still getting same error.

Also changed to bios 2 and makes no difference.

[Brighttail]

I had a similar issue the other day, just out of no where motherboard refused to boot. Turned out my 8-pin ATX wire had died. I tried a new PSU and everything worked fine so I started going through the 24 pin then the 8 and 4 pin and found it was the 8 pin ATX that was dead for some reason. Replaced the wire and all works now.

I would try with a separate PSU just on the 24 and 8 pin and see if you can get to BIOS. If you don't have a second PSU. Try moving the 8Pin wire to another slot on the PSU or if you have a modular system try different wires.

Beyond this, then you are looking at CPU issues. Check for bent pins. One or two bent pins can do things like you are describing.