Page 9 of 9 FirstFirst ... 7 8 9
Results 81 to 87 of 87
  1. #81
    ROG Member Array m33ts4k0z PC Specs
    m33ts4k0z PC Specs
    MotherboardASUS Prime B-365 Plus
    ProcessorIntel Core i7 8700K
    Memory (part number)Corsair Vengeance 32GB @ 3200MHz
    Graphics Card #1Gigabyte Aorus GTX 1080Ti
    Sound CardAsus ROG Xonar Phoebus Solo 7.1
    MonitorBenQ 32" BL3201PT 4K
    Storage #1Samsung NVMe SSD 950 PRO 512GB
    Storage #2Western Digital Black 1TB
    CPU CoolerCorsair Hydro H100X
    CaseFractal Design Define R5
    Power SupplyFractal Design Newton R3 1000W Platinum
    Keyboard Logitech G915 Lightspeed
    Mouse Logitech G502 Lightspeed
    Headset Sennheiser GSP 600
    Mouse Pad SteelSeries QcK Edge - Large
    OS Windows 10 Pro
    Network RouterASUS AC-88U w/ ASUS Merlin

    Join Date
    Nov 2014
    Reputation
    10
    Posts
    18

    Quote Originally Posted by werakoko View Post
    Hi guys,
    Appreciate all the hard work.
    The drive I got is ADATA SX8200pro 1TB, supposed to reach average 2300 read, 1800 write, I assume should be limited by pcie2.0x4. I have an issue with low bandwidth, after modding bios 213 with either nvme dxe 3 or 4, I have just 800 MB/s read/write. I have tried benchmarking from windows (Crystalmark), and from ubuntu disk manager benchmark, identical result. I have also tried removing all my drives and testing just the nvme drive from ubuntu on a USB stick. Tried using intel nvme driver instead of MS one under windows (I used intel 760p one, it has the same controller as SX8200pro). Windows installed on a SATA SSD in master slot, GPT partition table. Disabled legacy boot/secure boot in BIOS. Seems similar to what @Kliszczak got.

    Attachment 85407
    Hello,

    you could try the tips described here.

    Good luck.

  2. #82
    ROG Junior Member Array
    Join Date
    Dec 2017
    Reputation
    10
    Posts
    1

    I did this or a similar mod a few years back and still use it.

    Today i wanted to look at someones windows install on a normal sata stick. The BIOS and Windows couldn't see it at all.

    Does installing the NVMe bios module overwrite/remove the normal sata support?

    Thanks.

  3. #83
    ROG Guru: Gold Belt Array Clintlgm PC Specs
    Clintlgm PC Specs
    Laptop (Model)Asus G752VY DH72
    MotherboardAsus Z97 Pro WiFi and /Z97 Pro A
    ProcessorI7 4790K
    Storage #1512 GB M.2 Samsung 960 Pro
    Storage #21 TB Samsun 850 Pro
    CaseCool Master Haf
    OS Win 8.1 Pro and Win 10 Pro
    Clintlgm's Avatar
    Join Date
    Jul 2012
    Reputation
    105
    Posts
    4,173

    Quote Originally Posted by Gords View Post
    I did this or a similar mod a few years back and still use it.

    Today i wanted to look at someones windows install on a normal sata stick. The BIOS and Windows couldn't see it at all.

    Does installing the NVMe bios module overwrite/remove the normal sata support?

    Thanks.
    Well yes I think so, the bIOS mod would send the data tot he PCIe bus and no longer to the SATA bus they are two different data paths.
    Last edited by Clintlgm; 07-23-2020 at 09:38 PM.
    G752VY-DH72 Win 10 Pro
    512 GB M.2 Samsung 960 Pro
    1 TB Samsung 850 pro 2.5 format
    980m GTX 4 GB
    32GB DDR 4 Standard RAM

    Z97 PRO WiFi I7 4790K
    Windows 10 Pro
    Z97 -A
    Windows 10 Pro

  4. #84
    ROG Member Array m33ts4k0z PC Specs
    m33ts4k0z PC Specs
    MotherboardASUS Prime B-365 Plus
    ProcessorIntel Core i7 8700K
    Memory (part number)Corsair Vengeance 32GB @ 3200MHz
    Graphics Card #1Gigabyte Aorus GTX 1080Ti
    Sound CardAsus ROG Xonar Phoebus Solo 7.1
    MonitorBenQ 32" BL3201PT 4K
    Storage #1Samsung NVMe SSD 950 PRO 512GB
    Storage #2Western Digital Black 1TB
    CPU CoolerCorsair Hydro H100X
    CaseFractal Design Define R5
    Power SupplyFractal Design Newton R3 1000W Platinum
    Keyboard Logitech G915 Lightspeed
    Mouse Logitech G502 Lightspeed
    Headset Sennheiser GSP 600
    Mouse Pad SteelSeries QcK Edge - Large
    OS Windows 10 Pro
    Network RouterASUS AC-88U w/ ASUS Merlin

    Join Date
    Nov 2014
    Reputation
    10
    Posts
    18

    Quote Originally Posted by Gords View Post
    I did this or a similar mod a few years back and still use it.

    Today i wanted to look at someones windows install on a normal sata stick. The BIOS and Windows couldn't see it at all.

    Does installing the NVMe bios module overwrite/remove the normal sata support?

    Thanks.
    No it doesn't. You don't remove anything from the BIOS. You just add a new module. I used my M.2 to test if it got recognised and it did, then I swapped back to my SATA samsung evo 860 and it booted normally. Also you can find configurations online or even in this thread of people using naked SATA together with M.2 on this laptop.

  5. #85
    New ROGer Array
    Join Date
    Aug 2020
    Reputation
    10
    Posts
    1

    Hello, first of all I am but a noob so this may be a very obvious error, but I cannot seem to fix it.

    I did the mod on my G751-JT BIOS ver. 213 and it worked, now my computer detects my Kingston A2000 as a bootable device. However, the Windows i install there just keeps crashing, sometimes even when installing. I have a separate windows installation in an HDD and that doesnt seem to happen.
    I tried reinstalling windows, disconnecting the HDD and reinstalling windows all to no avail.

    Might anyone know what the problem is?

  6. #86
    ROG Member Array
    Join Date
    May 2018
    Reputation
    10
    Posts
    11

    I apologise if this is a dumb question, but if I want to set up a dual boot system, is it possible after I've done this process? I'd like to install a Linux OS, perhaps Kali.

  7. #87
    ROG Member Array chris_tronic PC Specs
    chris_tronic PC Specs
    Laptop (Model)Asus ROG G751 JY
    MotherboardAsus
    ProcessorIntel I7 4710HQ
    Memory (part number)24 GB
    Graphics Card #1Geforce GTX 980m
    Sound CardRealtek HD Audio
    MonitorIPS Panel
    Storage #1512 GB SM951 NVMe
    Storage #22 TB Hitachi HGST
    Keyboard QWERTZ
    OS Windows 7 Ultimate

    Join Date
    Jan 2017
    Reputation
    12
    Posts
    18

    Multiboot NVMe

    Quote Originally Posted by season_of_ages View Post
    I apologise if this is a dumb question, but if I want to set up a dual boot system, is it possible after I've done this process? I'd like to install a Linux OS, perhaps Kali.
    You don't need to be afraid.
    I'm running Windows and Linux as dual boot for a long time on different devices. My Windows is on the SAMSUNG EVO 970 M.2 NVMe and my Kubuntu is on the SAMSUNG EVO 850. And I experienced no troubles at all.
    You only need to know were to install your GRUB Bootloader and which Boot Option you choose for initial start.
    For example: I installed the Windows EFI Bootloader on my M.2 and the GRUB Bootloader on my SATA SSD.
    Than I choose the SATA SSD BOOT Option and adjusted Grub for Multiboot.

    Greetings

    Chris

Page 9 of 9 FirstFirst ... 7 8 9

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •