Guys after a long inactive period of time i'm back to this hobby.
The objective is to get a stable @4.6 at the lower voltages (and speed vent) possible this will be my 24/7 profile.
but first let me show you my machine
😄yes i have to clean the dust and manage the vent cables but i'm still tweaking the speeds (none of the vents are connected to the motherboard)
the case is fully closed its only open in the back at the moment! the plan is to close it.
Specs:
Asus Maximus VIII Hero
Corsair 110i GT
Skylake 6700k
gSkill Trident Z 16Gb 3000Mhz
NZXT H440 V2 Black
Corsair RM750i
so i was stuck at @4.6 with a 1.32vcore, i was manage to get @1.295vcore.
by lowering the core pll voltage from 1.25v(auto) to 0.9v (still room to lower the value)
changing the pll bandwidth to 0 (it was the default i guess)
by lowering the internal pll voltage to 0.9v
(with this i gain like a -5ºC/-7ºC)
after enabling the XMP i noticed that the auto values of VCCIO ; System Agent Voltage and PHC where way to high like 1.30 /1.35 at this moment they are at 1.1v max, and i didn't had any memory errors or bsods.
all green frendly settings on bios are off.
the stress test used was the realbench.
i will upload my values later so you can take a look and my bios settings too
please share your opinions with me, is it wise to lower the pll voltages like i did? should i try to lower them even more?
at this moment i'm testing lower vcore voltages.
like i said the hwinfo screenshot will come soon
cheers!