cancel
Showing results for 
Search instead for 
Did you mean: 

No Boot - Code 94 Test NVRAM

Biego
Level 7
Hello Everyone,

I have a problem with my Zenith Extreme Motherboard, It won't boot and give me ( Code 94 Test NVRAM) and stops at the white led in the booting sequence Leds.
I tried TR 1950X - TR 1900 and with the same problem.
Bios Version: 0902
I tried to install one DRAM, several, NVMe, and No hard drives with the same thing.
8,186 Views
6 REPLIES 6

Arne_Saknussemm
Level 40
Hi Biego...sorry this post seems to have slipped notice!:eek:

Any luck sorting it?

Arne Saknussemm wrote:
Hi Biego...sorry this post seems to have slipped notice!:eek:

Any luck sorting it?


The same problem still exists, unfortunately.

Arne_Saknussemm
Level 40
Have you tried a different GPU or tried the GPU in another slot...maybe try the other x16 slot on the board not the first one...

Arne Saknussemm wrote:
Have you tried a different GPU or tried the GPU in another slot...maybe try the other x16 slot on the board not the first one...

Thanks for your replies,
I tried different GPUs in different slots with the same result.
I tried to flash the bios again with bios flashback but it never completed with a constant light.

Arne_Saknussemm
Level 40
Hmmm...honestly...sounds like the board needs to be returned 😞

Rob_W_
Level 12
I don't know if this is related,
I had same code on R6E , turned out I had not set up optane storage yet, so uninstalled optane , sorted the problem out for now,
was just a thought!
had to re flash bios first.