[ExpertWiFi] How do I enter my ExpertWiFi router's setting page using web GUI? | Official Support

FAQ

[ExpertWiFi] How do I enter my ExpertWiFi router's setting page using web GUI?

This article describes how to access the ExpertWiFi router's Web GUI.

If you haven't completed the initial setup, you will be directed to QIS Wizard (Quick Internet Setup) page. You may refer to below for QIS.

[ExpertWiFi] How to set up ASUS ExpertWiFi router via ASUS ExpertWiFi App? (QIS, Quick Internet Setup)

[ExpertWiFi] How to use the QIS (Quick Internet Setup) to set up ExpertWiFi router? (Web GUI)

You can access the ExpertWiFi router's Web GUI via either wired or wireless connection.

For accessing the ExpertWiFi router's web GUI wirelessly, please refer to here.
For accessing the ExpertWiFi router's web GUI through a wired connection, please refer to here.

For accessing the ExpertWiFi router's web GUI wirelessly

1. Ensure that the ExpertWiFi power LED is steadily lit.

2. If your ExpertWiFi router has completed the QIS (Quick Internet Setup), please connect your WIFI devices like phone or computer to the WIFI SSID your configured and enter the password.

3. After the WIFI device is successfully connected, you can refer here login to Web GUI.

For accessing the ExpertWiFi router's web GUI through a wired connection

1. Ensure that the ExpertWiFi power LED is steadily lit.

2. Take a Ethernet cable and connect your computer to the LAN port of your ExpertWiFi router.

3. After the Wired device is successfully connected, you can refer here login to Web GUI.

1. Open your web browser and enter your router's LAN IP address or http://expertwifi.net into the address bar to access the ExpertWiFi Web GUI.

2. Enter your ExpertWiFi router username and password, then click on the [Login] button.

Note:

a. The username and password used to login to the router settings page are NOT the wireless name(SSID) and password used to connect wireless(WiFi) to the router.
b. If you forget the login username and password, please reset the router and run the initial setup again.
Please refer to this article for router reset.[ExpertWiFi] How to restore your ExpertWiFi router to factory settings
Use long and more complex passwords: Use passwords with more than 10 characters mixed with capitalized letters, numbers, and special characters to increase the security level of your devices. Do not use passwords with consecutive numbers or letters, such as 1111111111, 1234567890, abcdefghij, or qwertyuiop.

3. After entering the Web GUI, you can start configuring various settings for your ExpertWiFi router.

The following Web GUI screen is an example using Expert WiFi EBM68, and the features may vary depending on the firmware version or model differences.

How to get the (Utility / Firmware)?

You can download the latest drivers, software, firmware and user manuals in the ASUS Download Center.

If you need more information about the ASUS Download Center, please refer this Link.

Was this information helpful?

Yes No

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ