ROG STRIX Z270H GAMING

Item How to attach Note

M.2 fan holder

Download

  • Use screws to attach the fan mount to the motherboard's existing chassis-mounting holes.
1.The M.2 fan holder must be able to withstand temperatures of at least 100°C — so choose your materials accordingly.
2.The fan holder is designed for 40x40mm fans, so be sure to use a fan of this size.
3.The existing case screws for mounting the motherboard may need to be replaced by a longer screw with the same thread size.

Cable cover (short)

Download

  • 1. Fit supplied screw in the 3D Mount to secure one end.
  • 2. Use a case screws and existing chassis-mounting hole to secure the one end and use an M.2 screw to secure the other end.
1. The cable cover must be able to withstand temperatures of at least 60°C, prevent electrical interference, and maintain compatibility with other installed components — so choose your materials accordingly.
2. The existing case screw for mounting the motherboard may need to be replaced by a longer screw with the same thread size.

Cable cover (long)

Download

  • Use screws to secure the cover to the motherboard's existing chassis-mounting holes.
1. The cable cover must be able to withstand temperatures of at least 60°C — so choose your materials accordingly.
2. The existing case screws for mounting the motherboard may need to be replaced by a longer screw with the same thread size.

Cable combs-1

24-pin, 14-pin, 8-pin, 6-pin, 4-pin cable combs
Download

  • Fit both rows of a power cable's sleeved cables indiviually into a single resepective slots. Fold over 180 degrees and respectively fit both rows again into the opposing slots.
The holes in these combs are 4.2 mm to keep the cables firmly in place.
* If the hole size is not compatible with your cable, you can download this source file and adjust the size as you want with software we recommanded.

Cable combs-2

24-pin, 6+8-pin, 8-pin, 6-pin, 4-pin cable combs
Download

  • Remove the connector and fit all sleeved cables indiviually into the resepective slots.
These combs require that you remove the connector from your cables, it is strongly advised that you have experience with sleeving before attempting to use these or consult an expert. The holes in these combs are 4.2 mm to keep the cables firmly in place.
* If the hole size is not compatible with your cable, you can download this source file and adjust the size as you want with software we recommanded.

2-way SLI bridge cover

5cm, 7cm, 9cm
Download

  • Clip the cover onto the SLI HB bridge PCB.
The 2-way SLI bridge cover must be able to withstand temperatures of at least 60°C — so choose your materials accordingly.

Fan grill

Download

  • Mount the fan grill with standard 120mm fan screws.
The fan grill must be able to withstand temperatures of at least 60°C — so choose your materials accordingly.

ROG fonts

Download

  • Select the letters you want and attach to any accessories of your choice.
3D-printed ROG font letters must be able to withstand temperatures of at least 60°C — so choose your materials accordingly.

ROG keychain

Download

  • Print a 3D keychain and show your ROG passion to the world.
Only the ROG logo tag will be included in the file, key ring is not included.

Disclaimer

  • Products certified by the Federal Communications Commission and Industry Canada will be distributed in the United States and Canada. Please visit the ASUS USA and ASUS Canada websites for information about locally available products.
  • All specifications are subject to change without notice. Please check with your supplier for exact offers. Products may not be available in all markets.
  • Specifications and features vary by model, and all images are illustrative. Please refer to specification pages for full details.
  • PCB color and bundled software versions are subject to change without notice.
  • Brand and product names mentioned are trademarks of their respective companies.
  • Unless otherwise stated, all performance claims are based on theoretical performance. Actual figures may vary in real-world situations.
  • The actual transfer speed of USB 3.0, 3.1, 3.2, and/or Type-C will vary depending on many factors including the processing speed of the host device, file attributes and other factors related to system configuration and your operating environment.

ROG Footer