[Specificatie] Welke routermodellen ondersteunen NAT Loopback? | Officiële Support

FAQ

[Specificatie] Welke routermodellen ondersteunen NAT Loopback?

Deze routers ondersteunen NAT Loopback, maar we hebben een dergelijke optie niet gemaakt in de WebGUI en ASUS-router-app, omdat deze standaard is ingeschakeld in routers.

Ondersteuningslijst:

WiFi 6 of hoger-router

TUF-serie

GT-serie

ZenWiFi-serie

RT-AX-serie

RT-AC1200G, RT-AC1200G+

RT-AC1750

RT-AC1900, RT-AC1900U, RT-AC1900P
RT-AC2900

RT-AC3100, RT-AC3200

RT-AC53U, RT-AC5300

RT-AC56U, RT-AC56R, RT-AC56S, RT-AC58U

RT-AC66W, RT-AC66U, RT-AC66U B1, RT-AC67U, RT-AC68U

RT-AC86U, RT-AC88U

DSL-N17U

DSL-AC52U

DSL-AC56U

DSL-AC3100

DSL-AC88U

Opmerking1: de standaardinstelling is ingeschakeld en kan niet worden uitgeschakeld.

Opmerking2: deze functie wordt alleen ondersteund als de bedieningsmodus van de router is ingesteld op de draadloze routermodus, en wordt niet ondersteund in de volgende modi

1) Access Point(AP)-modus/AiMesh-router in AP-modus
2) Repeater-modus
3) Mediabrug
4) AiMesh-knooppunt

Was deze informatie nuttig?

Yes No

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.

ASUS Ondersteuning VGV

Terug naar boven