[LCD Monitor]For wall-mounted use, the monitor requires a bracket that complies with VESA standards. The copper standoff screws must be installed first. | Official Support

FAQ

Product PG27UQ, PG27VQ, PG32UQX, PG35VQ, XG258Q

[LCD Monitor]For wall-mounted use, the monitor requires a bracket that complies with VESA standards. The copper standoff screws must be installed first.

"The screen can be wall-mounted after removing the detachable support bracket. Please ensure that the wall-mounting bracket you purchase complies with VESA specifications, and use copper standoff screws for installation."

1.Place the monitor face down on the table.
2.Use a screwdriver to remove the cover at the junction of the monitor and the stand.
3.Loosen the four screws on the back of the monitor.
4.Remove the stand/base.
5.Tighten the wall mount screw standoffs.

Support Model name:PG27UQ/PG27VQ/PG32UQX/PG35VQ/XG258Q

Specifications of the Copper Standoffs:

For VESA Wall Mount BOLT 29L(M4*20+9)S12.5 BZN HEX

Was this information helpful?

Yes No

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ