[Computer Chassis] ROG Hyperion GR701 right/left aluminum handles disassembly and assembly precautions

Notice
1. Kindly wear gloves to protect your hands before proceeding with disassembly or assembly. Pay special attention to the corners of the parts to avoid any scratches.
2. When the side panel or front panel is made of glass, please handle it with extreme care during disassembly to avoid any collisions, falls, or undue stress.
3. When disassembling, please lay the casing flat on a stable surface to prevent the side panel from falling during the process.
4. Kindly ensure that the relevant wires are neatly arranged during assembly to prevent any damage to the wires throughout the process. 
5. Keep track of all screws and small components during disassembly and assembly to avoid losing any parts.

 

Tools required

  • Phillips screwdriver PH2

         

  • Hex wrench 4mm

         

 

1. 1. Open side panel form magnetic latch and lift panel up to remove.

 

2. Remove the upper filter assembly.

 

3. 3. Remove the left and right handlebar rear covers.

 

4. 6 screws need to be removed, hexagonal screws on the upper handle and front panel  (1 on each side) and fixing screws on the rear of the case (2 on each side).
    * If necessary, please lay the casing flat on a flat surface for easy operation.

 

5. Removal of left and right-side aluminum handles completed.