[NUC] How to Disable Hyper-threading on NUC 12 Pro Kit NUC12WSKi5 | Official Support

FAQ

[NUC] How to Disable Hyper-threading on NUC 12 Pro Kit NUC12WSKi5

Resolution

During boot (while you see the NUC logo), click the F2 key to enter BIOS settings.
Click on the Advanced tab.
Open Performance > Processor and disable Hyper-Threading.
- To access the Performance option, you may need to perform these steps:
  1. Select the Power, Performance and Cooling tab.
  2. In the External Ambient Temperature Tolerance drop box, select the value User Defined (the default value is 35ºC). The Performance option will be enabled automatically.

Click the F10 key, confirmed by Y to save the settings and exit from BIOS.

Yes No

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ