©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

waintdeir · 11-21-2015

Hi,I am struggling with my Crosshair IV Formula. Almost everytime i want to start my PC it says "NEW CPU INSTALLED - F1 for Setup - F2 for Default".I tried everything i know till now... nothing helps... the only "helping" thing is to disable "Wait fo...

waintdeir · 08-13-2018

Good News!My ordered "sideglow fibre optic cable" arrived and I was able to change the parts today.Here you se my card with original optic cable (lights set blue):Here the replacement was built in (lights set blue):It is not 100% working, because wh...

waintdeir · 07-17-2018

Same issue here with an Strix RX480 O8G... I found some "4mm side glow fibre optic cable" on ebay and give it a try. Thanks IM2OTAKU4U for the hint.The sad thing is that one fan bearing is making some noise and maybe i need to RMA the card anyway.

waintdeir · 11-22-2015

Hi,as far i know, you will need some Airflow in your case even if most of the components are watercooled.Maybe you stress your VRM because of overclocking the cpu an need some extra airflow to this cooler.Do you have mainboard-waterblock(s)?The Aeroc...

waintdeir · 11-22-2015

waintdeir wrote:- Dismantle the CPU-Socket again and process the CPU contacts with "contact spray".Update:I did not use contact spray today but I dismantled the CPU socket again and bent the "clamps" a little tighter.Now the clamps seem to hold the C...

waintdeir · 10-19-2013

I had the Green flashing too... but i solved it now.Here is what helped me out:1. Download the Matrix 7970 Flash from asus.com support.2. Download the Matrix 7970 VGA Driver from asus.com support.3. Run the flash-tool.4. Install the drivers from asus...

User Statistics

User Activity

ASUS C4F "NEW CPU INSTALLED" - Problem

Re: Strange issue with 1070 Strix RGB LEDs

Re: Strange issue with 1070 Strix RGB LEDs

VRM cooling --> MoBo-Block / Airflow

ASUS C4F "NEW CPU INSTALLED" - Update - 1st Improvement

Re: 7970 Matrix Platinum - safe mode all the time