Search:

Hi there sorry for late reply, I packed it in its retail box along with the AC adapter only, and they packed it just like that when returned it to me.

Ok guys so here is the story, the day before yesterday I drove 1.5 hour to the Service Center in California because I wanted to avoid any physical damage to my unit. when I arrived at first they were...

Dear Bahz, I'm running GTX 980 Ti and also in fact my monitor is effected with the bug as you can see in my Video in page 1, anyways I managed to get an RMA# Which I was told I by your support team I...

Dear Bahz, I've been chatting with your support team for past hour and the guy named Manny P wants to have my monitor replace WHICH I DONT WANT and have no clue regarding the Firmware update program...

Hi Bahz,

Do we still have any idea when the Firmware will be ready? Also is the Asus RMA support aware of this issue so i don't run into issues when setting up RMA?

Thank you Bahz, I'll wait for your reply.

Dear Bahz,
Can you tell me if there is a service center in California that I can personally take my monitor to have it serviced for firmaare ? Reason I'm asking is I am exteremly sensitive about my...

Dear Bahz, can you also get some kind of estimate on when the firmware will be ready? will I be notified here in forums or will I have to keep checking the PG279Q support and drivers section?

Best,

Dear Bahz

Thank you for the followup, I hope I don't have to send in my monitor for firmware upgrade as I really don't want my unit to be damaged/scratched/ or replaced ( since after several...

Yea it seems Asus is either clueless about this issue or they are just ignoring it, EVERY single PG279Q and XB271HU ( Same panel ) has this issue: Acer was nice enought to address it as it's just a...

Hi Bahz,

I have sent you a PM with all the info as well as my purchase receipt.

My god after 5-6 replacements I still have the same exact issue, except this panel is perfect, no Backlight bleed and no uniformity issue at all but he same issue where every once in a while a line...

I am also interested to know this.

Hi Chino, I have the M8H along with 6700K and G.Skill Trident Z 3200mhz, I can run it at 3200mhz rated speed but from the time I press the power button until I see the Bios logo is about 8-10sec, is...

I was going to make a topic regarding this but I also had the exact same issue right after I upgraded to 1402, took me 2 weeks to figure it out and changed monitor/cable/GPU and still would not make...

As mentioned before, yes you can Disable memory timing but It's a very bad idea, alternatively you can run your ram at 2666mhz or lower but with tighter timings and then you get that really quick...

Hi AKBAAR,
I meant from the time u press the power button till u see Bios logo. For me it takes about 12 sec then after that about 4 sec to boot into OS. Can u please share ur Ram seeking in bios as...

Hi AKBAAR,
A little off topic question, I see you are using pretty much the same exact setup as mine with the same Ram, can u please tell me what speed are you running your Ram? For instance if I...

So my computer been running pretty flawless for days and been gaming and all, should I assume nothing happened to the board it self and it was just the fan hub?

From very close inspection the burn smell was 90% coming from the cable of 6 channel fan hub not the Motherboard and I even checked the fan header on the board and it works fine, I'm just worried...

Ok something bad happened last night, I have all 6 fans inside ny case connected to my case 6 channel fan controller, last night I tried to plug the fan controller PWM cable to my MB Fan_3 header (...

Hi Chino, thank you for such nice guide but i have question, do you Disable Intel SpeedStep? Also do u disable C-State or leave it on auto or enable it?

Remove everything from that case and assemble your hardware on a cardboard box, then use only 1 stick of ram and before turning on the system make sure you first hold the Clear CMOS button for 15-20...

Yes I have noticed the same behavior, I never had this issue on my Maximus VII Formula ( Z97) with 218v controller, also I just switched my M8H to MSI Z170 Gaming M9 which uses Killer E2400 and this...

Completely agree, this is almost too funny. Why would u release a so called extreme variant which had PLX chip in the previous versions always, and then cut one of the main important features and...