Search:

Type: Posts; User: joppiano

Search: Search took 0.00 seconds.

  1. So to understand this load current/amps thing. ...

    So to understand this load current/amps thing.

    If running a manual fixed voltage at 1.350v, when it's idling there is no current/amps, therefor it doesn't really matter. But when under load there...
  2. So your suggesting a setting with vdroop rather...

    So your suggesting a setting with vdroop rather than a so called "vboost" ? So having a higher vcore, but lower when under load. Rather than a low vcore, but higher when under load?

    E.g.
    LLC 5 -...
  3. Why do you ask? MCE maxes out Power and...

    Why do you ask?

    MCE maxes out Power and current limits.
    SVID Behavior: Best Case - Sets AC/DC to 0.01. I just manually set them as well.
    Voltage Offset: If I remove offset -0.053v, my vcore will...
  4. So here is an update. I have spend the last...

    So here is an update.

    I have spend the last few days working on my adaptive settings to finetune it. And seems like I found what works the best for my chip.

    5.0GHz settings (w/ adaptive...
  5. Aura is SO annoying to use. It's frustrating. ...

    Aura is SO annoying to use. It's frustrating.

    I really don't understand why this issue isnt fixed yet. It works flawless when you JUST installed it. But after messing with it for a few minutes,...
  6. How does Offset mode works vs. Adaptive mode?...

    How does Offset mode works vs. Adaptive mode?
    When choosing Offset mode, you don't type in a specific voltage value, but rather a offset value of X.XXv, right?
    But what is the base voltage then?
  7. Well I get your point. But I havent changed my...

    Well I get your point. But I havent changed my current settings so far, since it's stable as it is. Just wish i had lower voltages tbh.
    Also regards to Der8auer's overclocking video, you gotta keep...
  8. Okay, well that is a good thing tho. I just did...

    Okay, well that is a good thing tho.
    I just did a 20 min of 8x8 fft prime95 and passed with current adaptive oc settings.
    Max temp was 82c and average 78-79c.

    I guess i could try lower my...
  9. Okay, easy then. And yeah, of cause not...

    Okay, easy then.

    And yeah, of cause not running 8hr realbench everytime i adjust something. But that is what I used IBT for before. To get a quick reference test. However, it seemed very hard to...
  10. From this article....

    From this article.
    https://rog.asus.com/forum/showthread.php?109183-Having-trouble-switching-to-Adaptive-voltage-mode-on-Z390-Maximus-XI-Formula-9900k#post762259


    Ok, so in regard to prime95...
  11. Please read my last reply regarding llc 6 etc. I...

    Please read my last reply regarding llc 6 etc.
    I get vboost and not vdroops. What is your thoughts on this?

    Also, when i ran prime95 v26.6, i used custom 1344-1344 fft. What is the difference...
  12. First of all, let me get you up to speed. I used...

    First of all, let me get you up to speed.
    I used the above settings (w/adaptive voltages), and i passed Realbench for 8 hours throughout the night. So happy about that.



    Well I did a lot of...
  13. i7-9700K - Getting stable 5.0GHz with adaptive mode

    Hey guys.

    I have the last 4 days worked on getting my i7-9700K stable on 5.0GHz with manual voltages, and i finally managed to make it happen.
    My end goal was always to end up with adaptive...
Results 1 to 13 of 13