Results 1 to 3 of 3
  1. #1
    ROG Member Array
    Join Date
    Dec 2011
    Reputation
    10
    Posts
    5

    Please need some attention: Rampage III Extreme and LGA 1366 i7 960

    Hello guys... I need some help to experts here on how to find the sweet point to overclock my pc... I am really new to this kind of new innovation about overclocking ad have no idea...

    this is the spec of my pc:

    motherboard: Asus Rampage III Extreme
    Processor: LGA 1366 i7 960 3.2GHz
    Memory: Corsair Tri channel 6x2 GHz, total of 6Gbyte
    Cooler: Antec 620 H2O kuhler
    PSU: 750w

    BIOS Template:

    Target CPU Frequency 4000MHz (My possible target)
    Target DRAM Frequency 1603MHz

    LN2 Mode: Disabled***
    QPI Loadline Calibration: Enabled***

    Sync Mode [Enabled]
    AI Overclock Tuner [Manual]
    OC From CPU level Up [Auto]
    CPU Ratio Setting [20.0]
    CPU Turbo Power Limit [Disabled]

    >CPU Configuration----------------------------
    CPU Ratio Setting [20.0]
    C1E Support [Enabled]
    Hardware Prefetcher [Enabled]
    Adjacent Cache Line Prefetcher [Enabled]
    Intel(R) Virtualiyation Tech [Enabled]
    CPU TM Function [Disabled]
    Execute Disable Bit [Enabled]
    Intel(R) HT Technology [Enabled]
    Active Processor Cores [All]
    A20M [Disabled]
    Intel(R) SpeedStep(TM) Tech [Enabled]
    Intel(R) C-STATE Tech [Enabled]
    C State package limit setting [Auto]
    ----------------------------------------------

    BCLK Frequency [Auto]
    PCIE Frequency [Auto]
    DRAM Frequency [Auto]
    UCLK Frequency [Auto]
    QPI Link Data Rate [AUTO]

    Memory Configuration Protect [Disabled]

    >DRAM Timing Control--------------------------
    CAS# Latency 9 [Auto]
    RAS# to CAS# Delay 9 [Auto]
    RAS# PRE Time 9 [Auto]
    RAS# ACT Time 24 [Auto]
    RAS# to RAS# Delay 6 [AUTO]
    REF Cycle Time 110 [Auto]
    WRITE Recovery Time 15 [Auto]
    READ to PRE Time 9 [Auto]
    FOUR ACT WIN Time 31 [Auto]
    Back-To-BackCAS# Delay 0 [Auto]

    Timing Mode 1N [1N]
    Round Trip Latency on CHA [AUTO]
    Round Trip Latency on CHB [AUTO]
    Round Trip Latency on CHC [AUTO]

    WRITE To READ Delay(DD) 8 [Auto]
    WRITE To READ Delay(DR) 8 [Auto]
    WRITE To READ Delay(SR) 18 [Auto]
    READ To WRITE Delay(DD) 7 [Auto]
    READ To WRITE Delay(DR) 7 [Auto]
    READ To WRITE Delay(SR) 7 [Auto]
    READ To READ Delay(DD) 7 [Auto]
    READ To READ Delay(DR) 6 [Auto]
    READ To READ Delay(SR) 4 [Auto]
    WRITE To WRITE Delay(DD) 8 [Auto]
    WRITE To WRITE Delay(DR) 8 [Auto]
    WRITE To WRITE Delay(SR) 18 [Auto]
    ----------------------------------------------

    CPU Differential Amplitude [Auto]
    CPU Clock Skew [Auto]
    IOH Clock Skew [Auto]
    ------------ Extreme Engine Digi+ ------------
    Digi+ PWR Mode [T-Balanced]
    PWR Volt. Control [Auto]
    Load-Line Calibration [Auto]
    CPU Voltege OCP [Enabled]
    CPU PWM Frequency [Auto]

    Extreme OV [Disabled]
    Extreme OC [Auto]

    CPU Voltage 1.250 [Auto]
    CPU PLL Voltage 1.812 [Auto]
    QPI/DRAM Core Voltage 1.350 [Auto]
    DRAM Bus Voltage 1.654 [Auto]

    >DRAM REF Voltages----------------------------
    DRAM DATA REF Voltage on CHA [Auto]
    DRAM CTRL REF Voltage on CHA [Auto]
    DRAM DATA REF Voltage on CHB [Auto]
    DRAM CTRL REF Voltage on CHB [Auto]
    DRAM DATA REF Voltage on CHC [Auto]
    DRAM CTRL REF Voltage on CHC [Auto]
    ----------------------------------------------

    IOH Voltage 1.244 [Auto]
    IOH PCIE Voltage 1.508 [Auto]

    ICH Voltage 1.111 [Auto]
    ICH PCIE Voltage [Auto]

    ---------- Spread Spectrum Control -----------
    CPU Spread Spectrum [Disabled]
    DRAM Spread Spectrum [Disabled]

    A simple giving idea and suggestion would be a great help and much appreciated.

    thank you guys...

  2. #2
    ROG Guru: Grand Master Array HiVizMan's Avatar
    Join Date
    Dec 2011
    Reputation
    354
    Posts
    25,742

    BCLK to 200
    Multi to 20
    Vcore to 1.34

    Done deal
    To help us help you - please provide as much information about your system and the problem as possible.

  3. #3
    ROG Guru: Yellow Belt Array 69_Goat's Avatar
    Join Date
    Jul 2010
    Reputation
    10
    Posts
    145

    Do a Google search for "Miahallen Overclock Guides".

    Find the guide for the 1366 sockets and work your way through it.
    You will learn far more than if someone posts up a bunch of settings for you to try.
    i7-980X | EVGA 762 Classified | 6GB Dom GT 2000C7 | GTX580 SLI
    i7-2600K | Asus MIVE-Z68 | 4GB Dom GT 2000C8 | GTX580 Martix




Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •