hi All,
Has someone got any good ideas what can I do with this issue.
My 6 month old pg348 suddenly doesn't want to overclock - it is stuck at either 60 or 50 (depending on what I selected in nvidia setting).
Worked fine for 6 months, there were no changes in the PC configuration or cable (same displayport cable that came with the monitor, card is an EVGA Gforce 1080Ti)
I go to Over Clocking, move joystick right, tick out the ON, go down to Max Refresh Rate, push joystick, select a value from 75 to 100 (tried all). Click again. I get the message that after reboot I need to set the Max Refresh Rate in Nvidia. Push joystick again. One quick red flicker, then I see black screen with 100Hz in the middle ( no matter what value I selected) then another quick flicker with black screen/100 HZ, then the screen returns but shows the Light in Motion option window for some reason, with the 4 Levels to select. I have to click on the joystick again to make it disappear, kind of like selecting.
Now if I go back to the Over Clocking option with the joystick, the On option is again unticked, unchanged
Checking the resolution (windows or Nvidia) I can only see 50 or 60 Hz.
I tried the monitor's reset in System Setup (called All Reset)
I tried enabling the Overclock with and without the displayport cable connected to the PC (same cycle happens, I push the joystick to acknowledge the overclocking, screen flickers 2 times showing 100Hz, then I get the annoying Light in Motion window)
Powered it down for a few minutes.
Turbo button just brings up 60 Hz - not even sure if this is a symptom or just an outcome of not enabling the Overclock
I am stuck - as I said it worked for about 6 months. Any ideas appreciated. I can try reinstalling nvidia drivers, but as I said, I cant activate overclocking in the menu even if the montior is disconnected.
post Note: just realized that now every time I turn off/on my PC, the screen does not turn off, as it used to, but starts flashing lights =red, white, green) - I left it for a minute but it just keeps doing it until I turn the monitor off