03-06-2020 06:25 PM - last edited on 03-05-2024 08:18 PM by ROGBot
03-06-2020 10:43 PM
03-07-2020 11:50 AM
RedSector73 wrote:
Does the waterpump have it own CPU backing bracket and if so do you have it on backwards (this can cause short circuit the board). If you overtighten the heatsink/waterblock onto the cpu can also have same effect.
Are you using from the CPU side, ram slots 2 & 4.
03-07-2020 03:57 PM
03-08-2020 04:38 PM
RedSector73 wrote:
If your trying to use RAMx4 population, the configuration really need to be on the Memory QVL for the x4 population or may have a problem with that. Stick to using slot (from the cpu) 2 for a single dimm or using 2 & 4 till you have boot / can enter bios.
There is ATX connector above the CPU to the left top of the motherboard, do you have it connected ?
I've not encountered your type of problem before and I'm afraid I don't have any other ideas to try/eliminate based on the information.