09-08-2020 08:43 PM - last edited on 03-05-2024 06:54 PM by ROGBot
09-08-2020 09:34 PM
Samdalf wrote:
Hi, I hope I am in the right place. First build here and this has been driving me nuts. I noticed that the fans don't spin below 40% PWM setting in armoury crate.
I have the ROG RYUJIN 360 connected to the AIO pump header with the fans connected to the AIO pump fan connector.
I noticed that the fans don't start spinning unless the PWM% is at least 40% in armoury crate. As of right now I changed the default smart mode setting of 30% PWM/30C to 40%/30C so there is some fan action going on.
Is this normal or is there something I am missing? Any advice would be greatly appreciated. Thanks!
09-08-2020 11:10 PM
Super Gnome wrote:
What is your motherboard? Mine has no AOI header, so I have it connected to the CPU header but your set up is fine. I have rid my system of Armoury Crate with a Windows reinstall. Hence, my fan control is from the Bios. I have left the CPU fan set to automatic and all works fine. My fans spin perfectly, and I monitor my temperatures using HWMonitor to be sure the CPU cores are cruising at the right and healthy temperatures at all times.
Have you downloaded the firmware (update)? Here is a link:
https://www.asus.com/Cooling/ROG-RYUJIN-360/HelpDesk_Download/
Hopefully this helps.
Just on an aside, if I remember correctly the fans did not spin all the time the first hour or so after I built my rig, but later they worked fine. If your motherboard is an Asus one, perhaps Fan Xpert in AI Suite ii will remedy your trouble.
09-09-2020 07:26 AM
Samdalf wrote:
should I have been using fan Xpert from the start?
09-09-2020 11:13 AM
09-09-2020 03:27 PM
alexmihaila wrote:
need AC to keep RYUJIN VRM Fan under control, no other software or bios can control that.
09-10-2020 06:54 AM
09-10-2020 06:25 PM
alexmihaila wrote:
AI Suite X-Fan xpert conflicts with armor crate on controling RYUJIN fans so i didnt install AI Suite, but use Armour to control FAN Speeds with same settings like in BIOS, need AC to keep RYUJIN VRM Fan under control, no other software or bios can control that.
Depending on mobo you can get real CPU temp; on mine i can select CPU package temp which is highest die temperature and its the same temp mobo displays on its 2 digit display or HWinfo.
09-12-2020 07:37 PM
09-21-2020 10:20 PM