©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Subsider · ‎06-22-2016

Like the tittle says ive been having boot issue since installing new GPU. Blue screen within a min or 2 of boot and pc acts laggy . once I reboot all seems fine except asus fan control (although running) isn't loading the desktop icon . new GPU Is a 980 gxt ti old GPU was a 780 gtx oc . psu is a 750 watt PC and PC . ive been using for about 7-8 years . tested and all voltages seem as good as the day i got it . even with cap aging .... went a head and ordered a new psu anyways but I'm really thinking its not the psu . water cooled , 8x 120mm fans ,led's , hd's , my oc ect should not exceed the 750w (60amp on 12 rail) . what do you all thik ? driver possibly ? im using the latest driver from NVidia . old driver uninstalled , cleaned with DDU and fresh install . like I always do. never ran into this behavior before so I'm not sure where to start looking . have these errors in the event viewer every time I boot .

Log Name: System
Source: nvlddmkm
Date: 6/22/2016 8:40:53 AM
Event ID: 13
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Subsider
Description:
The description for Event ID 13 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\Video3
Graphics Exception on GPC 3: SAVE_RESTORE_ADDR_OOB
Event Xml:
http://schemas.microsoft.com/win/2004/08/events/event">

13
2
0
0x80000000000000

14471
System
Subsider

\Device\Video3
Graphics Exception on GPC 3: SAVE_RESTORE_ADDR_OOB
0000000002003000000000000D00AAC0000000000000000000000000000000000000000000000000

and
Log Name: Microsoft-Windows-Kernel-PnP/Configuration
Source: Microsoft-Windows-Kernel-PnP
Date: 6/18/2016 9:39:14 PM
Event ID: 441
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Subsider
Description:
Device DISPLAY\ACI2498\5&32fb02be&0&UID4353 could not be migrated.
Last Device Instance Id: DISPLAY\DEFAULT_MONITOR\5&A4E078B&0&UID0
Class Guid: {4d36e96e-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0xF000FFFF0000F100
Present: false
Status: 0xC0000719
Event Xml:
http://schemas.microsoft.com/win/2004/08/events/event">

441
0
2
0
0
0x4000000000000000

803

Microsoft-Windows-Kernel-PnP/Configuration
Subsider

DISPLAY\ACI2498\5&32fb02be&0&UID4353
DISPLAY\DEFAULT_MONITOR\5&A4E078B&0&UID0
{4D36E96E-E325-11CE-BFC1-08002BE10318}

0xf000ffff0000f100
false
0xc0000719

Subsider · ‎06-22-2016

I'm leaning towards a driver problem but I'm not sure . . I'm running dual screens with one dvi and one hdmi . the hdmi as main (once windows loads) and its not loading my color settings and I need to open NVidia control panel and merely click apply to get it set ...

Subsider · ‎06-22-2016

went back to 365.19 (skipping back the last 2 released) so far all seems normal so far . will see in the morning as it happed every cold boot since installing the 980 ti and new driver and I still need to apply color settings in NVidia control panel for the monitor using the hdmi cable after every boot and when monitor turns off . could this be the hdmi cable I'm using ?

Subsider · ‎06-23-2016

anyone ?
NOPE ! error/blue screen after cold boot this morning . search shows tons of folks with this problem , most running Win 10 but not all . this is getting frustrating, not often that I cant find a solution to a problem ! this one is proving to be a head ache !
this is the error this morning - bsod driver power state failrure video tdr failure nvlddmkm

Minsekt · ‎06-23-2016

are you sure the card itself is not faulty?
does it happen too if you have only one monitor connected?
does it happen if youre removing the card and use onboard graphics?
do you have any overclock? (fclk maybe ?)
anyway, i would do a cmos reset and a clean install of windows if possible.

Subsider · ‎06-23-2016

I can only assume card is fine as after a reboot everything works normally . this only happens on cold boots not restarts . I just tried with only one monitor . the monitor using the dvi cable . received a warning driver stopped responding but recovered . no blue screen as of yet . flck is on auto (default) OC is stable but I did load defaults anyways when I tried different driver versions and still on defaults until I get this squared away .
updating my gpu has never been this painfull !

NemesisChild · ‎06-23-2016

Are you serious, your PSU is 7-8 years old?

You did the right thing by replacing it, report back after you get it installed.

Intel i9 10850K@ 5.3GHz
ASUS ROG Strix Z490-E
Corsair H115i Pro XT
G.Skill TridentZ@ 3600MHz CL14 2x16GB
EVGA RTX 3090 Ti FWT3 Ultra
OS: WD Black SN850 1TB NVMe M.2
Storage: WD Blue SN550 2TB NVMe M.2
EVGA SuperNova 1200 P2
ASUS ROG Strix Helios GX601

Subsider · ‎06-23-2016

NemesisChild wrote:
Are you serious, your PSU is 7-8 years old?

You did the right thing by replacing it, report back after you get it installed.

yes I know ... multi meter say's voltages are fine but ... just received a new SeaSonic SS-1050XP3 we shall see . wouldn't be surprised either way though . PC Power & cooling made quality psu's but it is aged

hiong · ‎06-24-2016

voltages aren't everything in a PSU... Especially if you are measuring without load.

Subsider · ‎06-24-2016

voltages were checked under load .... but like is said originally - went a head and ordered a new psu anyways..... ill have the SeaSonic SS-1050XP3 installed this wkend . I did try a few other things like , reinstall gpu drivers (again) but this time I went back to the driver I was using on my 780 gtx oc . also turned off fast boot in the bios . I'm not saying the matter is solved by no means but no blue screen so far this AM /cold boot !