Hello all hope someone can help me out. i got a new samsung 960 evo 250gb last night and im getting a bit stuck setting it up right... i think
1st thing i did before the install of windows was to reset the bios then load the usb with windows on in uefi mode.
after windows was installed i stuck the samsung drivers on and Samsung Magician. did the test in there and all looked good.
so i let windows update and stuck all my stuff back on. but now i just get about 1400/1500mb in the magician test?
plus now in the Bios if i set it to run XMP the 960 evo will no longer show as a boot driver or anything.( like its not plugged in no more )
But if i set Ai overclock tuner to manual it will show back in the bios but just runs at 2X4 and not 3X4?
But if i leave Ai cverclock tuner on auto it still shows in bios and will run at 3X4.
is there a setting im missing or some thing. will Ai coverclock tuner be ok left on auto with the rest of my overclock setting in for 4.6ghz running?
CrystalDiskMark 5 gives me a score.... see pic
dose that look right?
Any Reputation is welcome. thanks