10-24-2017 06:31 PM - last edited on 03-05-2024 07:10 PM by ROGBot
10-24-2017 07:47 PM
10-25-2017 06:24 AM
Clintlgm wrote:]\\
I think I would get the card, the price is right and the port is already connected and secured, looks like a drop in part? I'm not sure that the card will have the actual charging modular built into it or it that is another part on the Motherboard.
It looks to me that the socket only would take some work to get is totally stabilized on the card unless its a solder on?
10-25-2017 10:54 AM
10-25-2017 07:17 AM
10-25-2017 07:25 AM
Korth wrote:
You can use a DMM to test electrical properties of the jack itself, the charging PCB, the AC adapter, the battery, the wires in between them all. The jack is the last thing you want to replace unless you really like doing solder rework, while the other pieces/modules each cost money to replace.
I wouldn't order any replacement parts (or do any soldering) until I knew exactly which part has failed.
10-25-2017 03:18 PM
ufotheswe wrote:
How would I test the jack in with a DMM? How can I see if its working or not?
I think if I buy the miniboard with the jack in it doesnt require any soldering?
Edit: Here is the part that is broken: https://imgur.com/a/3Nuf3
10-25-2017 09:50 PM
10-27-2017 04:09 PM
Darnassus wrote:
I'd get the whole module.. saves you the soldering job.
Just make sure its sex is correct.. back with the G750's you could get models that have internal male. (Ones with a pin inside of the laptop) And internal female. (Pin inside the charging cord)